Vyhledat podle vozidla
Vyhledat podle KBA
Vyhledat podle motoru
Vyberte výrobce, model a typ motoru. Díky tomu bude moci náš systém najít díly pro Vaše vozidlo.
Vyberte si auto podle KBA.
Vyberte motor.
Zobrazit vyhledávání
Skrýt vyhledávání
Položky pro referenční číslo KT7006
Základní údaje
Kód: | FE30201 |
Značka: | FEBI BILSTEIN |
Název: | Sada žebrovaných klínových řemenů |
Doplňkový název: | řemen klínový |
Hmotnost : | 2,02 kg |
Vlastnosti
Délka [mm]: | 880 mm |
Počet žeber: | 8 |
Hmotnost [kg]: | 2,020 kg |
Doplňující výrobek/info 2: | s napínacím dílem |
Všeobecné informace: | Námi dodané výrobky jsou výhradně určeny k použití v souladu s jejich určením. Namontování smí provádět pouze vyškolený odborný personál. Výrobky se pravideln dodávají bez návodu k montáži. |
Zobrazit vše
Zobrazit méně
Základní údaje
Kód: | V10-0008 |
Značka: | VAICO |
Název: | Řídicí ventil, seřízení vačkového hřídele |
Doplňkový název: | Napínač rozvod.řetězu/pravý |
Vozidlo: | ŠKODA-VW |
Hmotnost : | 0,00 kg |
Vlastnosti
Montovaná strana: | pravá |
Druh provozu: | elektrický-hydraulický |
Doplňkový výrobek/ doplňkové info: | s těsněním |
Počet kontaktů zástrčky: | 2 pólová |
Tvar zásuvky: | pravoúhlý |
Hmotnost [kg]: | 1,039 kg |
Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně