Vyhledat podle vozidla
Vyhledat podle KBA
Vyhledat podle motoru
Vyberte výrobce, model a typ motoru. Díky tomu bude moci náš systém najít díly pro Vaše vozidlo.
Vyberte si auto podle KBA.
Vyberte motor.
Zobrazit vyhledávání
Skrýt vyhledávání
Autodíly dle výběru
Základní údaje
| Kód: | V10-63-9083 |
| Značka: | VEMO |
| Název: | Těsnení AGR ventilu |
| Doplňkový název: | Těsnění AGR ventilu/sada |
| Vozidlo: | ŠKODA-VW |
Základní údaje
| Kód: | V10-72-1031 |
| Značka: | VEMO |
| Název: | Snímač, zapalovací impuls |
| Doplňkový název: | Snímač polohy vačk.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Délka [mm]: | 380 mm |
| Počet kontaktů zástrčky: | 3 pólová |
| Délka kabelu [mm]: | 445 mm |
| Požadovaný počet kusů: | 1 |
| Délka kabelu [mm]: | 330 mm |
| Typ snímače: | Hallův senzor |
| Počet koncovek: | 3 |
| Jmenovité napětí [V]: | 12 V |
| Doplňující výrobek/info 2: | s kabelem |
| Barva krytu: | černá |
| Tvar zásuvky: | tvar D |
| Počet upevňovacích otvorů: | 1 |
| Barva zásuvky: | černá |
| Pro OE číslo: | 045 957 147 A |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V10-72-1033 |
| Značka: | VEMO |
| Název: | Generátor impulsů, klikový hřídel |
| Doplňkový název: | Snímač ot. klik.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Základní údaje
| Kód: | V10-72-1043 |
| Značka: | VEMO |
| Název: | Generátor impulsů, klikový hřídel |
| Doplňkový název: | Snímač ot. klik.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Délka [mm]: | 90 mm |
| Barva: | černá |
| Doplňující výrobek/info 2: | bez kabelu |
| Požadovaný počet kusů: | 1 |
| Typ snímače: | Hallův senzor |
| Počet kontaktů zástrčky: | 3 pólová |
| Počet koncovek: | 3 |
| Jmenovité napětí [V]: | 12 V |
| Armatura [mm]: | 20,2 mm |
| Tvar zásuvky: | tvar D |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V10-72-1094 |
| Značka: | VEMO |
| Název: | Generátor impulsů, klikový hřídel |
| Doplňkový název: | Snímač ot.klik.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Délka [mm]: | 50 mm |
| Šířka [mm]: | 40 mm |
| Výška [mm]: | 25 mm |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V10-72-1109 |
| Značka: | VEMO |
| Název: | Generátor impulsů, klikový hřídel |
| Doplňkový název: | Snímač ot. vačk.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Pro OE číslo: | 03C 906 433 E |
| Šířka [mm]: | 30 mm |
| Výška [mm]: | 28 mm |
| Délka [mm]: | 80 mm |
| Počet kontaktů zástrčky: | 3 pólová |
| Požadovaný počet kusů: | 1 |
| Typ snímače: | Hallův senzor |
| Počet koncovek: | 3 |
| Jmenovité napětí [V]: | 12 V |
| Armatura [mm]: | 20 mm |
| Doplňující výrobek/info 2: | se šroubem |
| Doplňující výrobek/info 2: | bez kabelu |
| Tvar zásuvky: | tvar D |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V40-72-0305 |
| Značka: | VEMO |
| Název: | Generátor impulsů, klikový hřídel |
| Doplňkový název: | Snímač ot. klik.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | OPEL |
Vlastnosti
| Průměr [mm]: | 35 mm |
| Délka [mm]: | 855 mm |
| Délka kabelu [mm]: | 770 mm |
| Počet kontaktů zástrčky: | 3 pólová |
| Požadovaný počet kusů: | 1 |
| Barva: | černá |
| Délka kabelu [mm]: | 820 mm |
| Typ snímače: | Hallův senzor |
| Typ snímače: | aktivní senzor |
| Počet koncovek: | 3 |
| Jmenovité napětí [V]: | 12 V |
| Armatura [mm]: | 24 mm |
| Doplňující výrobek/info 2: | s kabelem |
| Doplňující výrobek/info 2: | s těsnicím kroužkem |
| Tvar zásuvky: | pravoúhlý |
| Počet upevňovacích otvorů: | 1 |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V10-63-0083 |
| Značka: | VEMO |
| Název: | AGR-modul |
| Doplňkový název: | Ventil AGR/EGR |
| Tag: | EXPERT KITS + |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Doplňkový výrobek/ doplňkové info: | s těsněním |
| Doplňkový výrobek/ doplňkové info: | s AGR-chladičem |
| Doplňující výrobek/info 2: | s AGR ventilem |
| Druh provozu: | elektrický |
| Počet kontaktů zástrčky: | 5 pólová |
| Tvar zásuvky: | oválný |
| Typ chlazení: | chlazený vodou |
| Nový díl bez zástavy: | ano |
| Doplňkový potřebný díl - viz seznam příslušenství: | ano |
| Doporučené rozšíření opravy: | Montážní sada |
| Číslo výrobku doporučeného příslušenství: | V10-63-9083 |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V10-72-1032 |
| Značka: | VEMO |
| Název: | Snímač, zapalovací impuls |
| Doplňkový název: | Snímač ot. klik.hřídele |
| Tag: | Original VEMO Quality |
| Vozidlo: | ŠKODA-VW |
Vlastnosti
| Délka [mm]: | 445 mm |
| Počet kontaktů zástrčky: | 3 pólová |
| Požadovaný počet kusů: | 1 |
| Délka kabelu [mm]: | 420 mm |
| Typ snímače: | Hallův senzor |
| Počet koncovek: | 3 |
| Jmenovité napětí [V]: | 12 V |
| Doplňující výrobek/info 2: | s kabelem |
| Barva krytu: | černá |
| Tvar zásuvky: | tvar D |
| Počet upevňovacích otvorů: | 1 |
| Pro OE číslo: | 038 957 147 G |
| Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně
Základní údaje
| Kód: | V10-72-1067 |
| Značka: | VEMO |
| Název: | Váha vzduchu |
| Doplňkový název: | Snímač hm.vzduchu 2,0TDI |
| Vozidlo: | ŠKODA-VW |