Are you missing pliers for piston rings, tool for replacing piston rings or for cleaning of the gaps between them?
ET ENGINETEAM stock is growing and it is newly added by these practical tools, which can help you with replacing and installation of pistons and piston rings. Repair will then be easier, faster and also will prevent possible damage of replacement without the right tools where you are risking damaging or breaking the piston rings.
Following products and mounting tools :
Product number |
Name of a product |
Mounting tool for piston installation to the engine blocks of cars with piston diameter of 57-125 mm |
|
Pliers for piston rings installation and pistons for cars with piston diameters of 50-110mm |
|
Mounting kit for replacing rings and pistons |
|
Feeler gauges. Function as a measure tool of the gauge between piston after the piston rings installation |
|
Pliers for piston rings installation for pistons of these diameters: 50-110mm |
|
Installation pincers for replacing the piston rings of trucks with these piston diameters: 110-160mm |
|
Mounting tool for piston installation to the engine blocks of cars with these piston diameters: 57-125 mm |
|
Mounting tool for piston replacement in engine blocks of trucks with these piston diameters: 90-175 mm |
|
Tool kit for pistons and piston rings replacement |
We recommend following steps before and during the installation of piston rings:
1) Cleaning dirty pistons
- During every repair it is crucial to clean up the piston from all particles and impurities. E.g. oil stains on the surface, vents and gauges of pistons. It is also very important to remove carbon particles from the upper part of cylinder.
- While doing this step check, if the pistons or cylinders are not worn out and if there isn't need of replacing them.
2) Checking the piston gauges
- After all that cleaning, it is important to measure the piston gauge. Put your piston ring into the gauge and with help of feeler gauge Kolbenschmidt 50009824 measure the distance between the edge of the gauge and edge of the piston ring. If the distance is around 0,12mm or higher you need to change and replace your piston.
Size of gauge |
Piston usability |
0.05 – 0.10 mm |
Piston can be used without any limitations |
0.11 – 0.12 mm |
You need to check the piston frequently |
> 0.12 mm |
Piston needs to be replaced |
3) Piston ring kit check
- We recommend to replace the whole set while replacing piston rings.
4) Piston rings installation
- For installation of piston rings please use pliers ET Engineteam HP0013. Always make sure you know the width of the mounted piston ring. Over-extending the ring can cause its deformation or damage.
- When replacing rings with spiral expander, you need to make sure that ends of these spiral rings are in the opposite position to the main ring.
5) Piston installation
For installing the piston, you need to use mounting tool for piston HP0009. Make sure to oil the piston and rings enough, by which you avert the possible damage of rings while installing them.
Stock: | > 25 pcs |
Stock: | > 25 pcs |
Stock: | > 25 pcs |
General information
Code: | 50009824 |
Brand: | KOLBENSCHMIDT |
Title: | Tools |
Weight : | 0,06 kg |
Criteria
General Information: | Feeler gauge |
General Information: | The feeler gauge is suitable for measuring the valve clearance, ring joint clearance on piston rings and for many other applications. Measuring range from 0.05-1.00 mm. 13 blades in nickel-plated shell. |
General information
Code: | 120000316001 |
Brand: | KOLBENSCHMIDT |
Title: | Tools |
Weight : | 0,28 kg |
Criteria
General Information: | Piston ring pliers (passenger cars) |
General Information: | For mounting and dismounting piston rings. Sturdy shop quality, bright nickel-plated. For passenger cars piston rings Ø 50 - 110 mm. |
Stock: | 4 pcs | |
Supplier: | > 25 pcs |
General information
Code: | 50009829 |
Brand: | KOLBENSCHMIDT |
Title: | Tools |
Weight : | 0,27 kg |
Criteria
General Information: | For mounting and dismounting piston rings. Sturdy shop quality, bright nickel plated. For trucks, for piston rings Ø 110 - 160 mm. |
General Information: | Piston ring pliers (utility vehicles) |
Stock: | 11 pcs | |
Supplier: | > 25 pcs |
General information
Code: | 120000116900 |
Brand: | KOLBENSCHMIDT |
Title: | Piston Ring Pliers |
Weight : | 2,93 kg |
Criteria
General Information: | . |
General Information: | Piston Ring Mounting Set |
General Information: | Tool set, comprising piston ring pliers, piston ring scuff bands and feeler gauge in a stable tool case. |