As a registered user, you automatically get even better prices.
Comprehensive review of sealing substances Elring - sealants, usage, comparison...
Comprehensive review of sealing substances Elring - sealants, usage, comparison...
2018-11-06
We are introducing new comprehensive article about Sealing substances Elring in our stock. Table of usage, application or volume. It is the quality solution for demanding professionals and handymen. Sealing substances Elring can withstand harsh environment, high or low temperatures, or they can overcome hard conditions while processing.
Elring company has its branches in 140 countries around the world, seals and products ElringKlinger are being used in millions cars globally.
Types of sealing substances Elring - package, description
Individual solution - small tasks on engines, gearboxes etc.
Curil
Hardening, temperature resistant substance on artificial rosin basis for a long term sealing.
Features:
Reliable and impervious sealant even in the most extreme conditions.
Ideal for places without the need of frequent separating.
Liquid form for right and fast application.
Can be used individually or together with flat gaskets from soft materials or metal.
It is resistant against mineral oils (even with additives), gas or diesel fuels, hot and cold water, gasses, air and soft acids and alkalines.
Temperature constancy: -40 °C to +180 °C.
Curil K2
Hardening, temperature resistant substance on artificial rosin basis.
Features:
Sealed connections are easy to seperate and dissassemble - not hardening after application.
Low viscosity for sealing of the lathed and delicately lathed components, at which the tolerance cannot be changed.
Sealing against leaks while mechanical, chemical and temperature stress which can be seperated afterwards . Suitable for seals in between same or different materials, for whorls etc.
It is resistant against mineral oils (even with additives), hot and cold water, gasses, air.
Temperature constancy: -40 °C to +200 °C.
Curil T
Hardening, temperature resistant substance on artificial rosin basis for high temperatures.
Features:
Ideal for seals, which are exposed to very extreme conditions, especially for lothed solid surfaces.
Suitable for combustion places of engines, gear boxes, turbines, pumps and screwed connectors.
It is resistant against mineral oils (even with additives), gas or diesel fuels, hot and cold water, gasses, air and soft acids and alkalines.
Extraordinarily suitable for sealing of vertical surfaces.
Temperature constancy: -40 °C to 250 °C.
Dirko
Consistently elastic, temperature resistant universal sealing substance on silicone basis.
Features:
Extremely universal, very durable sealant.
Reliably sealing surfaces, seams and cracks, even in motion.
Viscosity and absolutely long term elasticity against leaks of oil, water and air.
In just one minute all the parts will become functional again, even with cracks in them.
Ozone resistant, UV resistant, durable in extreme weather conditions, hot and cold water, sea water, fats, mineral oils (even with additives), aliphatic hydrocarbons, detergents and many more chemicals.
Can be used individually for sealing from the outside between surfaces without dissassembling or together with flat gaskets.
Temperature constancy: -50 °C to +180 °C.
Dirko Spezial-Silikon|beige
Consistently elastic special sealing substance on silicone basis.
Features:
Special for sealing of wet sumps and box covers, special surfaces, cracks and flaws on some parts, which can leak while operation.
Sealant is after the hardening way harder than traditional silicone sealants.
It prevents tearing other sealing materials while high stress of other parts.
Temperature constancy: -50 °C to +180 °C.
Dirko HT
Consistently elastic, very high temperatures resistant sealant on silicone basis with top features.
It links the benefits of extreme power of Dirko sealant with resistance against high temperatures (HT).
Suitable for sealing of "extremely hot" connections, where temperatures go up to +250 °C.
Connections sealed by Dirko HT can shortly withstand temperatures up to +300 °C.
Temperature constancy: -50 °C to +250 °C (shortly up to +300 °C).
Dirko-S Profi Press HT
Consistenly elastic sealant on silicone basis for high stress in an aerosol can.
Features:
It reliably seals surfaces, seams and cracks, while in motion.
Extremely universal sealant for high stress.
Viscosity and absolute elasticity will stop leaks of oil, water and air very quickly.
Parts with cracks will become functional in just a minute.
Ozone resistant, UV resistant, can withstand extreme weather conditions, hot and cold water, sea water, fat, mineral oils (even with additives) aliphatic hydrocarbons, detergents and many other chemicals.
Can be used individualy for sealing from the outside between surfaces without dissassembling or together with flat gaskets.
Cone can nozzles are equiped with dripping limiter.
Temperature constancy: -50 °C to +250 °C (shorly up to +300 °C).
Ideal for sealing torgue stressed metal parts with flat sealing surface.
Used in cases of bearings, engine collars, and parts of gear box and mechanical parts.
Sealant is resistant against chemical and temperature impacts.
It will form itself and harden by air while making the metal connection between two parts that need to be connected.
Parts can be easily separated.
In contrast to usual flat gasket materials there is no screw force loss as a consequence of "pressing" down the material, even though it is in a direct contact between metal surfaces.
Right after assembly the parts are reliably sealed up until pressure of 5 bar.
Maximum pressure resistance and hardening is set after 24 hours.
Ideal for sealing torgue stressed metal parts with flat sealing surface.
Used in cases of bearings, engine collars, and parts of gear box and mechanical parts.
Sealant is resistant against chemical and temperature impacts.
It will form itself and harden by air while making the metal connection between two parts that need to be connected.
Parts can be easily separated.
In contrast to usual falt gasket materials there is no screw force loss as a consequence of "pressing" down the material, even though it is in a direct contact between metal surfaces.
Right after assembly the parts are reliably sealed up until pressure of 5 bar.
Maximum pressure resistance and hardening is set after 24 hours.
Temperature constancy: -55 °C to +180 °C.
Sealing substances kit
Universal solution for small tasks.
Features:
Containing three sealants Curil T, Dirko HT and Dirko-S.
For many different uses e.g. engines, shafts and underbody.
Suitable for use in cars and trucks, motorbikes, and vintage cars, agricultural machines, ship engines and applications "do it yourself".
Optimal sealing of surfaces and parts without dissmantling them (Dirko-S, Dirko HT).
Safe use and easy to work with the products.
While dissmantling fast and unproblematic cleaning of parts (Curil T).
All sealants are ecological.
Servis kit
Individual solution for dealing with all kinds of sealing problems by the method "do it yourself" on engines, gear boxes, under bodies and other parts.
Technical parameters of the product and its application
Curil
Curil K2
Curil T
Dirko
Dirko Spezial silikon
Dirko HT
Dirko–S Profi Press HT
AFD 2000
AFD 2018
Goes along well with:
Abil EWP, other soft materials
+
+
+
+
+
+
+
–
–
Pressed parts from plastic, cork
+
+
+
+
+
+
+
–
–
Metals
+
+
+
+
+
+
+
+
+
Rubber materials
–
–
–
+
+
+
+
–
–
Resistant against
Mineral oils (with additives)
+
+
+
+
+
+
+
+
+
Gasoline and diesel fuel
+
+
+
–
–
–
+
+
Cold and hot water, sea water
•
•
•
•
•
•
•
•
•
Gasses and air
•
•
•
•
•
•
•
•
•
Hardening
•
• anaerobic
• anaerobic
Not hardening
•
•
Permanently elastic
•
•
•
•
Temperature constancy
–40 °C to 180 °C
–40 °C to 200 °C
–40 °C to 250 °C
–50 °C to 180 °C
–50 °C to 180 °C
–50 °C to +250 °C shortly to 300 °C
–50 °C to 250 °C shortly to 300 °C
–55 °C to 150 °C
–55 °C to 180 °C
Time before joining 5 – 10 min.
•
•
•
Skin formation time 5 – 10 min.
•
•
•
•
Max. filling of the gap
0,1 mm
0,1 mm
0,1 mm
2 mm
2 mm
2 mm
2 mm
0,3 mm
0,5 mm
Store in cold and dry environment, from +5°C to +25 °C
•
•
•
•
•
•
•
•
•
Storage time - unopened - min. (in months)
24
24
24
12
12
12
18
12
12
Application:
Sealing without dismantling
–
–
–
•
•
•
•
–
–
Cover plates
•
•
•
+
+
+
+
•
•
Axles
–
–
–
+
•
•
•
–
–
Intake system
–
•
•
+
+
+
+
–
–
Differential housing
•
•
•
+
•
•
•
–
–
Various flange connections
•
+
+
+
+
+
+
•
•
Injection pumps
+
•
•
•
•
•
•
–
–
Gearbox housing
–
•
•
+
+
+
+
–
–
Threaded connections
–
•
•
•
–
–
•
•
•
Boiler constructions
–
–
–
–
–
+
+
–
–
Hobbies and do-it-yourself
–
–
–
+
+
+
+
–
–
Cables and pipe penetrations
–
–
–
+
+
+
+
–
–
Fuel and oil pumps
+
•
•
–
–
–
–
•
•
Crankcase
•
•
•
•
+
•
+
•
•
Air compressors
•
•
+
•
•
•
•
+
+
Camshaft carrier
–
–
+
–
–
–
–
+
+
Wet sumps
–
–
–
+
+
+
+
–
–
Retarders
–
–
–
–
–
+
+
–
–
Headlights, rear lights
–
–
–
+
+
+
+
–
–
Side covers
–
•
•
+
+
+
+
•
•
Timing cases
•
+
+
•
•
•
•
+
+
Thermostats
•
•
•
+
+
+
+
–
–
Valve covers
•
+
+
+
+
•
•
Carburetors
+
–
•
–
–
–
–
–
–
Water pumps
•
•
•
•
•
+
+
–
+
Cylinder bases
–
–
+
•
•
+
+
–
–
Cylinder liners
–
–
–
o+
–
–
–
–
–
+ good | • suitable | – not suitable
o+ use Dirko transparent