|
Brand: ET ENGINETEAM |
Code: SU0020 |
Title: Oil Sump
Oil Sump - SU0020 ET ENGINETEAM - 038103603AG, 038103601AK, 038103601AG
Car: Audi Skoda VW A3 Octavia Superb Caddy Golf Touran 1,9 / 2,0 TDI BXE BJB 2003+Oil wet sump ET Engineteam for engines 1,9 / 2,0 TDI made since 2003. Designed for Audi A3, Škoda Octavia / Superb, VW Caddy / Golf / Golf Plus / Jetta / Passat / Touran cars. Engines BKC, BJB, BXE, AZV, BKD. OE numbers: 038103603AG, 038103601AK, 038103601AG.
Used in
- AUDI
-
SKODA
-
SKODA AZV
100 kW / 136 HP 1968 ccm 4 cylinders 16 valves Diesel
-
SKODA BJB
77 kW / 105 HP 1896 ccm 4 cylinders 8 valves Diesel
-
SKODA BKC
77 kW / 105 HP 1896 ccm 4 cylinders 8 valves Diesel
-
SKODA BKD
103 kW / 140 HP 1968 ccm 4 cylinders 16 valves Diesel
-
SKODA BXE
77 kW / 105 HP 1896 ccm 4 cylinders 8 valves Diesel
-
SKODA AZV
- VW
Reference Numbers
Is a part of
SU0020VR1 - ET ENGINETEAM Oil Sump + sealing compound
We recommend!General information
Code: | SU0020VR1 |
Brand: | ET ENGINETEAM |
Title: | Oil Sump + sealing compound |
Car: | Audi Skoda VW A3 Octavia Superb Caddy Golf Touran 1,9 / 2,0 TDI BXE BJB 2003+ |
Weight : | 2,30 kg |
Criteria
Supplementary Article/Supplementary Info: | with seal |
General Information: | includes components ET Engineteam + Elring |
Netto price:
$116.67
($116.67 without VAT 0%)
Your price:
-40%
$70.00
($70.00 without VAT 0%)
Warehouse: | 2 pcs |
Alternatives
General information
Code: | V10-1884 |
Brand: | VAICO |
Title: | Oil Sump |
Car: | ŠKODA-VW |
Weight : | 2,52 kg |
Criteria
Width [mm]: | 280,0 mm |
Section: | Lower Section |
Observe the vehicle manufacturer specifications: | yes |
Length [mm]: | 430 mm |
Fitting Position: | Oil Sump |
Height [mm]: | 125 mm |
Supplementary Article/Supplementary Info: | with oil drain plug |
Supplementary Article/Info 2: | without oil sump gasket |
Oil Sump Material: | Aluminium |
Supplementary Article/Info 2: | with seal ring |
Supplementary Article/Info 2: | with bore for oil-level sensor |
See accessories list for additionally required parts: | yes |
Observe system fill quantity: | yes |
Weight [kg]: | 2,181 kg |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less